Skip to main content

​
Naming Conventions

While not mandatory, it is recommended to adopt the following naming conventions for clarity and usability:
  • Write Operations: Prefix register names with control. to indicate that the register is used to set the analog output.
  • Read Operations: Prefix register names with measure. to signify that the register is used to read the analog input signal.
See the example address map below for register naming conventions.

​
Required Parameters

​
string
required
A unique name for the register.Example: measure.voltage
​
int
required
Corresponds to the number on the analog input or output module.Example: 0
Please note that the address should start from 0, not from 1.
​
string
required
Indicates whether the register is an input or an output.Options: input | output

​
Optional Parameters

​
int | float
The scaling factor to apply to the analog register’s return value or the value being written.Example: 50
​
int | float
The offset to apply to the analog register’s return value or the value being written.Example: 100

​
Example

aio_address_map.json